Steps to Disable Two-sided Printing on Mac. On the next screen, first click on Administration Tab, next click on Printing and then set Duplex Printing Mode to OFF position (See image below). For some printers the Duplex Printing Mode option is located under General Settings (See image below) 8. Create a Duplex Printing Preset. Open the file or web page you wish to print. Select File Print, or do Command-P. In the print dialog box, click the drop-down menu which gives the name of the application, or says Copies & Pages, and select Layout. Click the Two-Sided drop down menu and select the appropriate binding.

I have an HP 1022 printer attached to my Mac OS X Lion.

When I try to print a 4-page PDF file from Preview or Adobe Reader, it prints pages 1 and 3 and then all 3 lights on the HP 1022 printer start blinking.

I suspect that perhaps the printer or the system is in some kind of manual double-side printing mode, but I could not find where I can turn it on or off using the Mac OS printing dialogs.

How can one control manual double-side printing on a Mac OS X Lion?

PepPep

4 Answers

You can go to Print & Scan in the system preferences and select Options & Supplies for your printer. In there, you should see an option for Duplex Unit (if your printer supports it). If that is checked, you can use the automatic double-side printing (by checking the Two-sided box next to Copies). If not, or if that option is unavailable, you can't.

In case you can't select that option, here's how you can manually print double-sided pages.

Manual double-side printing

You can control manual double-side printing (i.e., you physically turn the sheets over) using the Paper Handling setting in the print dialog.

Getting the same information in digital format is so much less expensive and more convenient!Maybe you need the manual to fix the brakes on your XB, or possibly replace some worn out suspension components. Whatever the case may be, this repair manual software for the Scion XB is just what you need.You will have all the service information you could ever need for your vehicle. Or you might need to get your engine running, or just do the required standard maintenance. Martin mac aura xb service manual.

If you select Paper Handling, you'll find a Pages to Print option that lets you print either only the odd pages or only the even pages (default is both). To print double side manually, select Odd Only first and when it finishes printing, flip the pages over and select Even Only

Instead of flipping each page over to its blank side before printing the even pages, you have a more convenient option of flipping the entire block of pages, so that the last sheet is on top (useful when you have a lot of pages to be printed). With this, you can then choose Reverse in Page Order to print the even numbered pages backwards. (Note: be careful that if you have an odd-number of pages in total, you might have to leave the last one out before printing the even ones.)

rm -rfrm -rf

In a search, I just found this great tool from HP that facilitates manual duplex printing from OSX with minimal steps. I just tried it with success using my Epson NX-515.

With my printer I can:

1. Select Paper Handling > Pages to Print > Odd Only and print the pages.
2. Insert the pile of papers on the tray again so that the printed side is facing up and the text is not upside down.
3. Select Paper Handling > Pages to Print > Even Only and print the pages.

With a printer that prints on the other side, follow the steps described by rm -rf:

1. Select Paper Handling > Pages to Print > Odd Only and print the pages.
2. If the total number of pages is odd, remove the last page
3. Flip the pile of papers and insert it on the tray.
4. Select Paper Handling > Pages to Print > Even Only, select Paper Handling > Pages to Print > Reverse, and print the pages.

LriLri

I've found that for my printer at least (a Brother HL-3070CW), it's easier to:

How To Manual Duplex Printing On A Mac Free

• print the even pages first
• flip the pages so the printed side is up and put them back in the tray
• print the odd pages

This way you end up with the pages in the correct order when finished and don't have to worry about selecting reverse.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged lionprinting .

My printers don't support automatic duplex printing. I'm looking for a solution for my Mac and Linux computers that I've seen with most Windows printer drivers:

• Check 'Manual duplex' in the printer screen
• Printer starts printing one side
• A dialog appears, asking me to flip the pages
• Printer prints the other side.

One thing I can do, is print odd pages, then reopen the dialog and print even pages, but this is very inconvenient, especially when I only want to print a certain page range of the document as the Mac dialog forgets my previous page range every time. It gets even more inconvenient, when printing 2-up double sided, or when changing additional settings for this one printout.

Is there maybe some tool, that can do this? Or maybe a 'virtual printer driver' that can sit somewhere between the dialog and the actual printer driver, which manages these steps? (The Windows tool http://en.wikipedia.org/wiki/FinePrint can do something like that, but I don't need all of its features, and I need it on Mac/Linux.)

Or does somebody maybe know a trick, how to make the print dialog stay open, i.e. 'Print, but don't close'?

Update

It doesn't seem, as if a tool like that exists yet. How hard would it be to implement something like that? Where would it need to be integrated - as a CUPS printer driver, or as a hook for the print action of the dialog? Could it work cross-platform, or would it have to be Mac/Linux-specific?

Can somebody with experience in Mac/Linux/driver programming shed a light on this?

Solution

The current solution:

Create an Apple Automator script:

Action: Extract Odd & Even Pages [All pages in separate files]

Action: Run Shell Script [Pass input as arguments]

Action: Ask for Confirmation ['Please flip the pages']

Action: Run Shell Script [Pass input as arguments]

It's not perfect yet. Suggestions for improvements and alternatives are very welcome!

Arjan

9 Answers

ALMOST, but no cigar yet: the 4th step only gets the odd pages from the 1st step, and then takes the even pages from that set.. That's no good. I will delete this some time later, unless I think of something smart. (The 1st step can also be made to create two files right away, but you need the confirmation dialog. Maybe there's some 'restart' or parallel processing in Automator.

For a Mac, Automator is your friend:

• Open Automator

• Select 'Print Plugin' (Print plugins are workflows that are available in the print dialog. They accept PDF versions of the document being printed. Prior to 10.6 Snow Leopard, you might not get this choice until you're about to save your workflow, rather than when creating an empty workflow. Should work the same.)

• Drag the following items into the workflow to the right:

  1. 'Extract Odd & Even Pages', and select 'Odd'

  2. 'Print Finder Items'

  3. 'Ask for confirmation', write some instructions

  4. 'Extract Odd & Even Pages', and select 'Even'

  5. 'Print Finder Items'

• Save it. It will end up in ~/Library/PDF Services/ and hence be part of the PDF menu in the Print dialog.

^{Automator to the rescue}

^{PDF menu in Print dialog}

When the total of pages is odd, you'll have to fiddle a bit with the first or last page of the first run. (If you'd put the whole stack back into the printer, then the last page might be left in the paper tray when you're done. Just try and adjust the instructions in step 3.)

karelArjanArjan

There's a project on sourceforge called duplexpr that may do what you want.

If yes, get the paper out carefully.Check if the printer can be seen on the Mac: Make sure you are printing with the default printer that displayed on your mac. Hot Articles.Fortunately, receiving and printings a password protected PDF, even not knowing what the password is not a tricky problem anymore. Mac print pdf to manual download. If there is no printer appearing on your mac, you need to manually add your preferred printer into the list of your devices by go to FinderApple MenuSystem PreferencePrinters&Scanners AddSelect your printer from the list.

I wrote it a long time ago and couldn't generate any interest in it so I have not updated it. If I can get an active user base of > 0, or someone interested in helping to develop or test it, I'll work on it again. I even have newer development code that has a few additional features. I'm also playing around with making it gui-enabled so it can be used from the desktop without going to the command line.

It's a set of bash scripts that emulate duplex printing for non-duplex printers. I've used it every day - for many years now.

One unique feature is that it allows batch two-sided printing so you can print several jobs at once and you only have to flip and reinsert the whole stack of paper once instead of once for each job.

The current version (on sourceforge) has a few problems. The first is that they changed bash. To get the current scripts to work (after you download them), the first line of each script has to be changed from #!/bin/sh to #!/bin/bash

The other problem is a design issue. Printers vary in how they handle paper. Some put out pages with the printed side face-up and some with the printed side face-down, etc. This means that there has to be more than one duplex printing algorithm. duplexpr currently supports only one algorithm. It works perfectly on printers like the HP Deskjet 720 and 895 (old) and the HP C4480 (newer). It almost works on my HP Laserjets (1006 and 1020). On these, all the pages it prints are correct and in the correct order, but each page needs to be flipped over manually after the job has finished printing (they come out 2/1, 4/3 .. instead of 1/2, 3/4).

Check it out and get back to me if you are interested in using it. You can send me email via the sourceforge project page (url above).

A few more thoughts:

duplexpr doesn't really address printing ranges of pages. You can do that by using the 'print to file' and 'page range' options available in most application print dialogs.

Once you have the output in a file (in the default (at least for Linux) postscript format), you have a number of options. You can then run it through duplexpr (which, by the way, handles the odd number of pages problem mentioned by other posters).

If you can handle using the command line interface (cli), then the lp command - or lpr, whichever you have installed, has options you can specify for odd pages only, even pages only and you can even give it page ranges if necessary. If that's not to your liking, there's an amazing little gui utility called xpp that will do all that and more. It will even let you create an alias for one of your existing printers that will print only even or odd pages. I use it all the time to recover from paper jams and multiple page feeds during the second pass of duplex printing (the second sides) so I can finish printing any one-sided pages didn't get trashed without starting from scratch.

With any of these manual methods, if you have an odd number of pages, you can just send a formfeed to the printer to eject the last page:

echo -n $'f' | lp

will do it or you can create a file with just a formfeed in it and send it to lp. This works on every printer I have tried so far.

Either way, it's a lot easier than remembering not to reinsert the last page, etc.

HTH

Joe

slhck

In the 'virtual printer driver' vein, you might try printing to Postscript or PDF from your application. This would especially help when printing a certain range or a complicated 2-up pagination.

How To Manual Duplex Printing On A Mac Pro

The general idea is, 'print' from the application with the settings you want (page ranges, pages-per-sheet, etc), but send the output to PS/PDF. Then use your OS's standard PS/PDF printing facility to handle the actual duplexing.

Alternately, run two print jobs from the application. Set the first to generate a PS/PDF of your up-facing pages, and the second to generate a second PS/PDF of your down-facing pages. Then the duplexing is already done, and all you need to do is print the first file, flip the pages and put them back in the printer tray, then print the second file.

It's certainly not the prettiest or most convenient method, but it should be doable by tweaking your workflow -- no additional software required. (I believe on OSX the print-to-PDF capability is built-in; it's fairly simple to configure on Linux if it isn't available out-of-the-box on your distribution.)

Gnome Manual Duplex is your friend. GUI'ified, Virtual Printer, CUPS compatible..

Based on the comments here, and on other forums, I've made some kind of a merged solution, merging the functions of Automator and Shell Scripts. As I've seen, such solution have not yet been posted, so this might come handy.

The only package you have to get is pdftk server, which can be downloaded from pdftk's official website. By installing pdftk server you only install a single package that gives you the ability to edit PDF files with shell scripts. Let me quote some text from the official website, about pdftk server:

After installation, open a Terminal, type pdftk and press Return. Pdftk will respond by displaying brief usage information. Access pdftk documenation by running man pdftk.

This installer creates a directory on you Mac: /opt/pdflabs/pdftk/. This will contain a bin directory which holds the pdftk program and a docs directory which holds the complete PDFtk manual.

With pdftk, we will be able to extract the odd & even pages of a pdf (which is very fast, compared to Automator's built in extractor), reorder and rotate pages. Reordering and rotating comes handy based on the printer you are using: you don't have to reorder the pages manually between printing odd and even pages. FYI: In my example, I've used a Samsung ML-2165W printer (in case you want to understand the flow of a paper within the printer).

The base comes from Arjan's top answer:

• Open Automator
• Select 'Print Plugin'(As Arjan wrote before: '.. print plugins accept PDF versions of the document being printed ..' which means that the first item's (you drag to the workflow) input will be that PDF)

• Drag the following items:

  1. Set Value of Variable. From the dropdown menu select Path.

  2. Run Shell Script: this is the part, where we're implementing pdftk.

     Explanation: sourcing the .bash_profile is necessary, because elsehow pdftk command won't be accessable. The while cycle is wrote based on pdftk's man page: all you have to know is that it extracts the odd pages of the input pdf into odd.pdf, which will be put in /tmp. After odd.pdf is generated, we will print it with default settings, using lpr shell command.

  3. Ask for confirmation: Put in some instruction text. IMPORTANT: when using this workflow, you have to wait until the printing process of the odd pages are completed, then put the pages back into the input tray, and THEN you can press ok. Elsehow, the upcoming shell script (which also includes printing obviously) will be executed before you can put the papers back.

  4. Get Value of Variable. Set Variable to Path. This is the tricky part: from options dropdown menu, select Ignore this actions's input. This give you back the original PDF's path, so you won't extract the just extracted odd pages further (which was a problem within comments above).

  5. Run Shell Script: printing the even pages (in backwards order, as well as in rotated orientation).

     Explanation: After extracting the even pages from the source PDF file, using the end-1 parameter with pdftk gives us a backward PDF. The rotating will be made using lpr command's parameters (I've tried to rotate it with pdftk, which went smoothly, but somewhy using lpr command with initial parameters rotated that pdf back, I guess because of the printer's settings). -o orientation-requested=6 gives us a 180 degree rotation (for more, see man lpr).

This screenshot summarizes the whole workflow.

First, open your printer and find the icon that indicates how to load letterhead paper. If it's loaded face up, then use this script:

Otherwise, use this script:

Jim Van Zandt in the post above has the key trick here - print the even pages first. This gets rid of the fiddle with the last page being blank.

Just using printer presets for your normal printer driver (yes you open the print dialogue twice but probably this can be applied in the automator scripts described earlier):

How To Manually Print Double Sided On Mac

duplex-even-1:

• Paper Handling -> Pages to Print: Even Only
• Paper Handling -> Page Order: Reverse
• Layout -> check box for Reverse page orientation

duplex-odd-2:

• Paper Handling -> Pages to Print: Odd Only

Print with the duplex-even-1 preset first, shift the paper from the output to the feeder, and print with the duplex-odd-2 preset.

Happy to learn if there is some automator sequence to specify a printer and a print preset for the output?

HP Two-sided printing software. I just used it, it works easily and perfectly. Of course, you need an HP printer which I have.

Not the answer you're looking for? Browse other questions tagged linuxmacosprintercupsduplex or ask your own question.